Protection against spam bots. Please answer the following question: What year is it this year?
682 results found:

Connecting the filter pump
Correct connection of the cartridge filtration is essential for its efficient operation. It is important to observe the height logic of the hose connection as well as the correct positioning of the pump below the water level. Improper extension of the circuit reduces the pressure and efficiency of the device.

Backwash for the Sand filter pump
Backwashing is important to maintain proper pressure and cleanliness of the filtration system. The procedure varies depending on the valve type - 4-way and 6-way - and ensures effective cleaning of newly placed sand.

Bleeding the cartridge filter pump
Too much air in the filtration system reduces water flow and can cause noisy operation or filtration malfunction. Venting is accomplished by turning the vent valve until water begins to escape. After proper venting, the filtration can be turned back on.

Boat Motor Mounting Kit
The boat motor holder allows the motor to be mounted on INTEX boats. It is important to know its dimensions and to take into account that the mounts are fixed on the boats and cannot be purchased separately.

Cartridge Filters – Basic Troubleshooting
The main problem with cartridge filtration is insufficient water flow. This can be caused by poor maintenance, mechanical failure and poor wiring. It is necessary to check the cartridge and the entire water circuit in which the filtration is connected.

Cartridge gauge
The new C1000 and C1500 cartridge filtration models are equipped with a cartridge wear indicator. The colour indication shows the condition of the filter - green indicates clean, yellow indicates the need for cleaning and red indicates the need for replacement or thorough cleaning.

Checking pressure release valve
The pressure relief valve can cause problems if it is not properly closed or tightened. Recommended procedure includes using a service wrench, gently tightening and checking without water in the hot tub. This will prevent possible leakage or damage.

Checking the jets
Blocked air valves or nozzles can cause the whirlpool's massage function to fail. By cycling on and simple valve or water routing steps, any debris can be removed and proper nozzle function can be restored.

Checklist for using Intex PureSpa
Operation of the Intex PureSpa hot tub requires a grounded outlet, a separate circuit breaker and avoiding extension cords. Regular testing of the surge protector and placing the plug in a dry and protected environment also ensures safety.

Cleaning cell SWS QS200,QS400
Regular manual cleaning of the titanium electrodes with a vinegar solution is essential for the proper functioning of the brine injector. It is important to remove the electrodes, let them sit and rinse under pressure to remove deposits and maintain the efficiency of chlorine production.