Níže naleznete přehled instrukcí, které můžete použít, pokud máte problém s vysokým nebo nízkým tlakem v pískové filtraci. Písková filtrace není samonasávací. Je proto nutné pumpu nainstalovat vedle bazénu tak, aby se nacházela pod úrovní vodní hladiny.
Low/no pressure
- Both the inlet and outlet of the pool must be completely submerged
- There must be no blockages in front of the inlet and outlet
- The hoses and the pump must be free of air
- There should be no air bubbles in the pump
- Make sure the pump has been prepared following manual
High pressure
- The filter medium must be clean
- Regularly perform a backwash and rinse according to the manual
If other devices are connected:
- Make sure the other products are completely free of air
- Keep the distance that the water has to travel as small as possible
- Everything must be set up below the water surface level