Protection against spam bots. Please answer the following question: What year is it this year?
44 results found for your search term: „Transom Mount Trolling Motor (68631)“
The following results contain only part of the search terms:

Transom Motor
The transverse marine electric motor requires a traction or semi-traction battery, ideally gel or AGM. The recommended battery capacity is 65-75 Ah, allowing operation for up to 5 hours at lower speeds. The charger should have switching between battery types or automatic charge cycle control.

Boat Motor Mounting Kit
The boat motor holder allows the motor to be mounted on INTEX boats. It is important to know its dimensions and to take into account that the mounts are fixed on the boats and cannot be purchased separately.

Code E90
Code E90 indicates insufficient water flow, usually due to a clogged filter or poor water quality. Common causes include dirty water, old filter or low chlorine levels. Changing the cartridge regularly and adjusting the water chemistry helps prevent problems.

Where should whirlpool filter be screwed onto
The filter in the whirlpool must be screwed onto the bottom suction opening so that the water passes through the filter cartridge correctly. Incorrect positioning can cause blockage of the pump outlet and damage to the filter, which is not covered by the warranty.

Deluxe wall mount skimmer
The Deluxe Skimmer is used to capture debris from the pool surface and is compatible with various types of INTEX pools. Proper installation includes attachment to the pool structure and connection to the filter pump. The skimmer improves the cleanliness of the surface, but it is advisable to disconnect it in time for full filtration.

Can I remove the filter pump motor cover?
No. Once disassembled, the pump is no longer covered under warranty and Intex is not responsible for any consequences that may arise from opening the motor cover. Failure to re-cover the motor may result in serious injury or accident.

Positioning of the hoses
The connection hose coming out of the motor body must be connected to the valve inlet. If it is connected to the outlet, the pump will only operate in the "N" position. Connect the hose coming from the motor to the inlet of the valve. A sand filtration set up in this way will work.

What does error E81 on the spa hot tub mean?
The reason for the E81 error message on the hot tub may be due to a faulty RCD, base not paired with the control panel, large distance between the control panel and the control base unit, a low charge on the control panel, or other malfunction in the motor part of the hot tub. Test the RCD first. If you have pressed the TEST button on the current protector, you have de-energized the base. Turn on the RESET (RÜCKSETZEN) button again, this will restore the power supply to the motor base. The wireless control panel could've been showing E81 because it was running on its own rechargeable battery while the motor base was without power.