Search | Intex Support

49 results found for your search term: „Standing Surf Swing (44001)“

Intex product user manual Standing Surf Swing, 44001

User manual, in which you will find all important information on using your Intex product. Standing Surf Swing, 44001

The following results contain only part of the search terms:

Setting up the Frame pool

Setting up a swimming pool with structure requires a firm and level surface, sufficient space and correct fixing of the supports. The metal structure should be treated with talcum powder before assembly for easier handling. During filling, it is important to check the tension of the belts, the alignment of the supports and the correct position of the corner pieces.

After installing the hanging skimmer and connecting it to a filter pump, the skimmer will start to vibrate and protrude from the water surface. What should I do?

Make sure the skimmer hose is perfectly connected from the pool to the filter pump. Place the hook (for Easy Set pools) on the top inflatable ring or tighten the screws (Metal Frame pools). Pay special attention to ensure that the hook does not pierce the inflatable ring of Easy Set pools. Check for air in the pump, skimmer or water circulation system. If necessary, bleed the system.

Can I use sand to level the area to build my INTEX pool?

No, sand tends to move easily which can cause damage to the pool. A soft, sandy or unstable surface will cause the structure to tilt, which can negatively affect the stability of the entire pool. The pool legs can sink into the sand, leading to instability and risk of property damage or injury. Only lay the pool on a hard surface such as garden pavers so that the surface can easily support the weight of the inflated pool.

Why does the pool start to tilt to one side even when it is on a level surface?

The terrain is probably not completely level. If this is the only place available for the pool, we recommend that the lowest leg of the pool be supported by a concrete brick or piece of wood to keep the top bars of the frame flush.

Deluxe wall mount skimmer

The Deluxe Skimmer is used to capture debris from the pool surface and is compatible with various types of INTEX pools. Proper installation includes attachment to the pool structure and connection to the filter pump. The skimmer improves the cleanliness of the surface, but it is advisable to disconnect it in time for full filtration.

Setting up the EasySet pool

The correct assembly of the EasySet pool has a major influence on its stability and durability. The key is to choose a firm and level surface, use a pad, lay out the shell correctly and do not over-inflate the inflatable ring. It is also important to avoid common installation mistakes that can affect the functionality of the pool.

What is the load capacity of the swing?

It depends on the particular model. Generally speaking, each element on the swing has a max load capacity of 50kg per child.

The panel shows a ridiculously high water temperature.

The control base has probably been idle for an extended period of time, the water in the pipe has warmed due to the outside temperature, and the sensor is sensing the temperature of the standing water. Turn on the filtration and let the water pump for a while. In a short while, the actual water temperature should appear on the panel.

Can I put an airbed on a conventional bed frame?

Inflatable beds can be placed on a platform or a flat or fixed surface. Old or damaged bed frames can reduce the comfort of your airbed and even cause damage to the bed itself. INTEX recommends using a firm, smooth surface.