Protection against spam bots. Please answer the following question: What year is it this year?
61 results found for your search term: „Solar Mat (28685)“

Solar mat
The correct procedure must be followed when connecting the solar heating system. The maximum pump flow is 5678 l/h and the heating must not be above the water level. If you are connecting several heaters in succession, open the valves sequentially. Aerated filtration and too many accessories in the circulation circuit reduce the water flow.

No or low water flow of the solar mat
Low or no water flow when using solar heating is usually due to higher resistance in the circuit. Recommended practice includes removing excess fixtures, proper venting and optimizing valve settings for multiple solar panels connected.
The following results contain only part of the search terms:

What are the advantages of the solar pool cover?
The solar pool cover reduces up to 95% of water evaporation and minimizes heat loss during the night. If the water level is covered by the solar cover during a sunny day, the water is heated. Whenever you use an INTEX electric heater, it is recommended to use a solar cover to maintain the temperature of your pool. In addition, the cpver protects the pool from the accumulation of debris in the water.

Can I put a solar heater on the roof?
Place the solar heater on the ground next to the pool. Do not place it on a table, on the roof or any other place above the water level. The pump might not be strong enough. The pump flow rate must be less than 5678 l/hr. A more powerful pump is not suitable for solar heating.

How do I connect the solar heater?
The heater should always be last in the pool water circulation system and the filter pump first. If you also have a separate INTEX saltwater system, connect the filter pump first, then the saltwater system and the solar heater last.

White fold lines on the spa tub
White wrinkles on an inflatable hot tub are not a manufacturing defect, but are caused by the folding of PVC in low temperatures. Over time they will disappear on their own or can be removed by heating with a hair dryer or pouring hot water over them. When heated, the PVC softens and the wrinkles gradually flatten out.