Protection against spam bots. Please answer the following question: What year is it this year?
159 results found for your search term: „Quickfill Battery Pump (66638)“
The following results contain only part of the search terms:

Transom Motor
The transverse marine electric motor requires a traction or semi-traction battery, ideally gel or AGM. The recommended battery capacity is 65-75 Ah, allowing operation for up to 5 hours at lower speeds. The charger should have switching between battery types or automatic charge cycle control.

What type of battery do you recommend for the Intex 68631 motor?
We recommend either a traction battery with a deep discharge cycle or a semi-traction battery. Preferably a gel or AGM Marine type battery (contents will not leak when tipped over). Recommended capacity 65 - 75 Ah (approx. 2hrs at max power). The battery charger should have the ability to switch for Gel, AGM, Normal batteries or be equipped with a microprocessor automatically controlling the charging cycle depending on the type of battery.

Can the battery of the ZR100 (28626) be replaced?
The battery is not replaceable, it is sealed inside to prevent water from reaching it and causing a short circuit. The body of the vacuum cleaner with the battery cannot be opened. If the battery does not work, the whole vacuum cleaner body (without accessories) must be replaced.

Can the battery of the ZR200 (28628) be replaced?
The battery is not replaceable, it is sealed inside to prevent water from reaching it and causing a short circuit. The body of the vacuum cleaner with the battery cannot be opened. If the battery does not work, the whole vacuum cleaner body (without accessories) must be replaced.

Can I connect an INTEX pool vacuum cleaner to the filter pump?
Yes, INTEX filter pumps are designed for the use of INTEX pool vacuum cleaners. Always make sure that the filter pump has the appropriate flow rate for the type of vacuum cleaner. Recheargeable INTEX pool vacuums are not connected to a pump, they are powered by their own battery.

Connecting the filter pump
Correct connection of the cartridge filtration is essential for its efficient operation. It is important to observe the height logic of the hose connection as well as the correct positioning of the pump below the water level. Improper extension of the circuit reduces the pressure and efficiency of the device.

The spa hot tub control panel has stopped responding and cannot be charged - what to do?
This problem can have two causes - either the panel and battery are at fault directly, or the charging station located in the motor base of the PureSpa hot tub. We therefore recommend that you first have the entire motor unit checked by a technician. If your hot tub is still under warranty, please contact your dealer to make a claim. If it is out of warranty, and you are sure that a new panel is needed, you can request one via our online spare parts form.

What does error E81 on the spa hot tub mean?
The reason for the E81 error message on the hot tub may be due to a faulty RCD, base not paired with the control panel, large distance between the control panel and the control base unit, a low charge on the control panel, or other malfunction in the motor part of the hot tub. Test the RCD first. If you have pressed the TEST button on the current protector, you have de-energized the base. Turn on the RESET (RÜCKSETZEN) button again, this will restore the power supply to the motor base. The wireless control panel could've been showing E81 because it was running on its own rechargeable battery while the motor base was without power.