Protection against spam bots. Please answer the following question: What year is it this year?
242 results found for your search term: „Pool Drain Pump (28606NP)“

How to drain a swimming pool? How to drain the last 10 cm of pool water? The siphon principle.
For instructions on draining the pool water and information on winterizing the pool, see the article below (Winterizing the Pool).If you have trouble draining the last 10 cm of pool water, here are some suggested solutions:1. If the water level drops below 10 cm for Metal/Prism/Ultra pools, you can remove one vertical leg and all horizontal beams and place them on the ground. The water will then start to drain.2. You can use a pool drain pump (catalog number 28606) or the siphon principle to drain rectangular pools. How to drain a swimming pool using the siphon principle Option A Connect a garden hose to the water supply. Place the free end of the hose in the swimming pool. Run water from the water supply into the hose. When the water starts to flow into the swimming pool, leave the end in the pool submerged in the pool water and turn off the water supply. Then unscrew the end from the water supply. This end will start to flow water in the opposite direction, i.e. out of the swimming pool.  Option B Immerse the garden hose completely in the swimming pool so that air can escape from both ends and the hose fills with water. Then fold the hose approximately 30 cm from the end at one end so that water does not flow out of this end. Remove the folded end of the hose and straighten the hose where you want the pool water to flow out.  

Getting the pool ready for winter
How to properly winterize a pool - the procedure for leaving the pool assembled as well as disassembling and storing it. Important steps include cleaning the water, adding winterizing chemicals, disconnecting accessories, and proper storage of the tarp and pool cover.
The following results contain only part of the search terms:

Is it necessary to drain the pool to repair the liner?
The patch should be applied internally and externally and should overlap the crack by at least 1.5 cm. Afterwards, it is a good idea to weight the adhered patch for 2 hours. The pool will probably need to be drained for this reason. It depends on the location of the hole and the adhesive used. There are adhesives that can be applied underwater.

Positioning of the hoses
The connection hose coming out of the motor body must be connected to the valve inlet. If it is connected to the outlet, the pump will only operate in the "N" position. Connect the hose coming from the motor to the inlet of the valve. A sand filtration set up in this way will work.

Setting up the EasySet pool
The correct assembly of the EasySet pool has a major influence on its stability and durability. The key is to choose a firm and level surface, use a pad, lay out the shell correctly and do not over-inflate the inflatable ring. It is also important to avoid common installation mistakes that can affect the functionality of the pool.

Installation auto pool cleaner for model ZX50 - 28007
The ZX50 pool vacuum model works on the principle of pump suction power and requires a connection to the pool outlet. It is important to follow the correct sequence of steps - submerging the hoses, connecting to the correct grommet and ensuring the correct water flow to start the unit.

What is needed to assemble the INTEX pool? Where should I place the INTEX pool?
Make sure that the site on which you are placing the pool is not tilted in any way. Make sure there is enough space around the pool. Leave at least 1 m of free space around the perimeter of the pool - for the metal structure (supports) and accessories (e.g. filter pump). At the same time, you should have enough space for comfortable use of the pool. Make sure that the site on which the pool will stand is level. Remove stones, twigs and other sharp objects to avoid possible damage to the pool. Also remove any prickly and aggressive plants with hard stems. Always lay the pool on a mat to avoid damaging the bottom of the pool.

Setting up the Frame pool
Setting up a swimming pool with structure requires a firm and level surface, sufficient space and correct fixing of the supports. The metal structure should be treated with talcum powder before assembly for easier handling. During filling, it is important to check the tension of the belts, the alignment of the supports and the correct position of the corner pieces.

How to Proceed with Repairing Inflatable Products
The repair of inflatable products depends on the type of damage. Minor tears can be repaired using PVC patches and suitable adhesive, while damaged seams cannot be repaired. It is also important to correctly detect air or water leaks in swimming pools, hot tubs, inflatable beds and boats and choose the appropriate adhesive or replacement parts.

Does the filter pump keep the pool walls and bottom clean?
No. The filtration will keep the pool water free of mechanical debris such as leaves, twigs, insects, etc. A pool maintenance kit should be used on the bottom of the pool. If your pool set does not include this accessory, you can purchase it. Pool vacuums are also available. INTEX can also offer you the Krystal Clear saltwater system, which will keep your pool free of debris, algae and bacteria. Depending on the local water conditions, it may be necessary to add pool chemicals to make the water clear and less hard. For further advice, we recommend that you consult a pool specialist in your area.