Protection against spam bots. Please answer the following question: What year is it this year?
1021 results found for your search term: „Pool Drain Pump (28606)“

Getting the pool ready for winter
How to properly winterize a pool - the procedure for leaving the pool assembled as well as disassembling and storing it. Important steps include cleaning the water, adding winterizing chemicals, disconnecting accessories, and proper storage of the tarp and pool cover.
The following results contain only part of the search terms:

How can I drain the pool?
1. Remove the drain valve cap located on the outside of the pool. 2. Connect the hoses to the hose adapter. 3. Take the hose to a place where you can safely drain the water. 4. Connect the adapter to the drain valve. Note: Water will begin to drain immediately. 5. When finished, remove the hose adapters. 6. Replace the drain cover inside the pool. 7. Remove the cover from the pool. 8. Make sure the pool liner is completely clean and dry before storing it for the next season.

Is it necessary to drain the pool to repair the liner?
The patch should be applied internally and externally and should overlap the crack by at least 1.5 cm. Afterwards, it is a good idea to weight the adhered patch for 2 hours. The pool will probably need to be drained for this reason. It depends on the location of the hole and the adhesive used. There are adhesives that can be applied underwater.

Setting up the EasySet pool
The correct assembly of the EasySet pool has a major influence on its stability and durability. The key is to choose a firm and level surface, use a pad, lay out the shell correctly and do not over-inflate the inflatable ring. It is also important to avoid common installation mistakes that can affect the functionality of the pool.

Installation auto pool cleaner for model ZX50 - 28007
The ZX50 pool vacuum model works on the principle of pump suction power and requires a connection to the pool outlet. It is important to follow the correct sequence of steps - submerging the hoses, connecting to the correct grommet and ensuring the correct water flow to start the unit.

What is needed to assemble the INTEX pool? Where should I place the INTEX pool?
Make sure that the site on which you are placing the pool is not tilted in any way. Make sure there is enough space around the pool. Leave at least 1 m of free space around the perimeter of the pool - for the metal structure (supports) and accessories (e.g. filter pump). At the same time, you should have enough space for comfortable use of the pool. Make sure that the site on which the pool will stand is level. Remove stones, twigs and other sharp objects to avoid possible damage to the pool. Also remove any prickly and aggressive plants with hard stems. Always lay the pool on a mat to avoid damaging the bottom of the pool.