Protection against spam bots. Please answer the following question: What year is it this year?
174 results found for your search term: „Mounted Pool Tray (28098)“
The following results contain only part of the search terms:

Code E90
Code E90 indicates insufficient water flow, usually due to a clogged filter or poor water quality. Common causes include dirty water, old filter or low chlorine levels. Changing the cartridge regularly and adjusting the water chemistry helps prevent problems.

Setting up the EasySet pool
The correct assembly of the EasySet pool has a major influence on its stability and durability. The key is to choose a firm and level surface, use a pad, lay out the shell correctly and do not over-inflate the inflatable ring. It is also important to avoid common installation mistakes that can affect the functionality of the pool.

Installation auto pool cleaner for model ZX50 - 28007
The ZX50 pool vacuum model works on the principle of pump suction power and requires a connection to the pool outlet. It is important to follow the correct sequence of steps - submerging the hoses, connecting to the correct grommet and ensuring the correct water flow to start the unit.

Boat Motor Mounting Kit
The boat motor holder allows the motor to be mounted on INTEX boats. It is important to know its dimensions and to take into account that the mounts are fixed on the boats and cannot be purchased separately.

Where should whirlpool filter be screwed onto
The filter in the whirlpool must be screwed onto the bottom suction opening so that the water passes through the filter cartridge correctly. Incorrect positioning can cause blockage of the pump outlet and damage to the filter, which is not covered by the warranty.

What is needed to assemble the INTEX pool? Where should I place the INTEX pool?
Make sure that the site on which you are placing the pool is not tilted in any way. Make sure there is enough space around the pool. Leave at least 1 m of free space around the perimeter of the pool - for the metal structure (supports) and accessories (e.g. filter pump). At the same time, you should have enough space for comfortable use of the pool. Make sure that the site on which the pool will stand is level. Remove stones, twigs and other sharp objects to avoid possible damage to the pool. Also remove any prickly and aggressive plants with hard stems. Always lay the pool on a mat to avoid damaging the bottom of the pool.

Setting up the Frame pool
Setting up a swimming pool with structure requires a firm and level surface, sufficient space and correct fixing of the supports. The metal structure should be treated with talcum powder before assembly for easier handling. During filling, it is important to check the tension of the belts, the alignment of the supports and the correct position of the corner pieces.

Getting the pool ready for winter
How to properly winterize a pool - the procedure for leaving the pool assembled as well as disassembling and storing it. Important steps include cleaning the water, adding winterizing chemicals, disconnecting accessories, and proper storage of the tarp and pool cover.

How to drain a swimming pool? How to drain the last 10 cm of pool water? The siphon principle.
For instructions on draining the pool water and information on winterizing the pool, see the article below (Winterizing the Pool).If you have trouble draining the last 10 cm of pool water, here are some suggested solutions:1. If the water level drops below 10 cm for Metal/Prism/Ultra pools, you can remove one vertical leg and all horizontal beams and place them on the ground. The water will then start to drain.2. You can use a pool drain pump (catalog number 28606) or the siphon principle to drain rectangular pools. How to drain a swimming pool using the siphon principle Option A Connect a garden hose to the water supply. Place the free end of the hose in the swimming pool. Run water from the water supply into the hose. When the water starts to flow into the swimming pool, leave the end in the pool submerged in the pool water and turn off the water supply. Then unscrew the end from the water supply. This end will start to flow water in the opposite direction, i.e. out of the swimming pool.  Option B Immerse the garden hose completely in the swimming pool so that air can escape from both ends and the hose fills with water. Then fold the hose approximately 30 cm from the end at one end so that water does not flow out of this end. Remove the folded end of the hose and straighten the hose where you want the pool water to flow out.  

Can grass grow through the pool liner or pool shell?
Yes, some species of robust grass, such as Bermuda or St. Augustine, can grow through the pool shell. Therefore, we recommend that you carefully clean and prepare the ground before building your pool to minimize the risk of overgrowth. A pool liner or protective tarp may help, but will not guarantee complete protection. INTEX is not responsible for grass growth as this is not a manufacturing defect.