Protection against spam bots. Please answer the following question: What year is it this year?
199 results found for your search term: „Graphite Gray Panel Rectangular Pool Set 400x300x124 cm (26396GN)“
The following results contain only part of the search terms:

Setting up the EasySet pool
The correct assembly of the EasySet pool has a major influence on its stability and durability. The key is to choose a firm and level surface, use a pad, lay out the shell correctly and do not over-inflate the inflatable ring. It is also important to avoid common installation mistakes that can affect the functionality of the pool.

Code E81
Error message E81 occurs when the hot tub control panel fails to connect to the base. Possible causes are a faulty current protector, too great a distance between the panel and the base, or improper pairing. The problem can be solved by testing the RCD, checking the connection and re-pairing the panel to the base.

Control panel – general informa
The control panel for the hot tub is either attached to the hot tub or wireless. Operation is simple, however, with a wireless panel, conditions can occur that confuse the user. Make sure that the panel is unlocked and that you are not pressing the buttons too long or too quickly in succession.

Installation auto pool cleaner for model ZX50 - 28007
The ZX50 pool vacuum model works on the principle of pump suction power and requires a connection to the pool outlet. It is important to follow the correct sequence of steps - submerging the hoses, connecting to the correct grommet and ensuring the correct water flow to start the unit.

How to drain a swimming pool? How to drain the last 10 cm of pool water? The siphon principle.
For instructions on draining the pool water and information on winterizing the pool, see the article below (Winterizing the Pool).If you have trouble draining the last 10 cm of pool water, here are some suggested solutions:1. If the water level drops below 10 cm for Metal/Prism/Ultra pools, you can remove one vertical leg and all horizontal beams and place them on the ground. The water will then start to drain.2. You can use a pool drain pump (catalog number 28606) or the siphon principle to drain rectangular pools. How to drain a swimming pool using the siphon principle Option A Connect a garden hose to the water supply. Place the free end of the hose in the swimming pool. Run water from the water supply into the hose. When the water starts to flow into the swimming pool, leave the end in the pool submerged in the pool water and turn off the water supply. Then unscrew the end from the water supply. This end will start to flow water in the opposite direction, i.e. out of the swimming pool.  Option B Immerse the garden hose completely in the swimming pool so that air can escape from both ends and the hose fills with water. Then fold the hose approximately 30 cm from the end at one end so that water does not flow out of this end. Remove the folded end of the hose and straighten the hose where you want the pool water to flow out.  

Setting up the Frame pool
Setting up a swimming pool with structure requires a firm and level surface, sufficient space and correct fixing of the supports. The metal structure should be treated with talcum powder before assembly for easier handling. During filling, it is important to check the tension of the belts, the alignment of the supports and the correct position of the corner pieces.

What is needed to assemble the INTEX pool? Where should I place the INTEX pool?
Make sure that the site on which you are placing the pool is not tilted in any way. Make sure there is enough space around the pool. Leave at least 1 m of free space around the perimeter of the pool - for the metal structure (supports) and accessories (e.g. filter pump). At the same time, you should have enough space for comfortable use of the pool. Make sure that the site on which the pool will stand is level. Remove stones, twigs and other sharp objects to avoid possible damage to the pool. Also remove any prickly and aggressive plants with hard stems. Always lay the pool on a mat to avoid damaging the bottom of the pool.

The spa hot tub control panel has stopped responding and cannot be charged - what to do?
This problem can have two causes - either the panel and battery are at fault directly, or the charging station located in the motor base of the PureSpa hot tub. We therefore recommend that you first have the entire motor unit checked by a technician. If your hot tub is still under warranty, please contact your dealer to make a claim. If it is out of warranty, and you are sure that a new panel is needed, you can request one via our online spare parts form.