Protection against spam bots. Please answer the following question: What year is it this year?
25 results found for your search term: „Disc Rope Swing (44002)“
The following results contain only part of the search terms:

Is it necessary to have safety and rescue equipment by the pool?
Yes, you should always have standard safety equipment and important phone numbers on hand in case of an emergency. Recommended equipment includes a life ring with a reinforced rope, first aid kit, a blunt-ended metal or plastic rescue pole (at least 365 cm long) and first aid instructions.

Cleaning cell SWS QS200,QS400
Regular manual cleaning of the titanium electrodes with a vinegar solution is essential for the proper functioning of the brine injector. It is important to remove the electrodes, let them sit and rinse under pressure to remove deposits and maintain the efficiency of chlorine production.

Cleaning cell SWS QS500,QS1200
In order to maintain the performance of the solinator, the titanium electrode must be cleaned regularly. The procedure involves safely disconnecting the unit, immersing the electrodes in vinegar and rinsing under pressure. Proper care extends the life of the unit and ensures effective water disinfection.

Error Code E97 for PureSpa
E97 indicates dry-run protection, usually caused by hot water, a faulty 84°C thermal fuse, or a defective PCB. First, test the unit and check the thermal fuse with a multimeter—replace it if faulty. If the issue continues, the control board may need replacement; contact the seller (if under warranty) or a service center.

Getting the pool ready for winter
How to properly winterize a pool - the procedure for leaving the pool assembled as well as disassembling and storing it. Important steps include cleaning the water, adding winterizing chemicals, disconnecting accessories, and proper storage of the tarp and pool cover.

High chlorine level in the spa
Too high a chlorine concentration can damage the hot tub - from staining the tub and warping the PVC to degrading the heater or filter pump. Always test the water before adding chlorine, and always blow out and store the hot tub if it is inactive for long periods of time.

RCD
Testing of the RCD on the INTEX hot tub is necessary before each use. Correct operation is verified by pressing the RESET and TEST buttons, and the RCD must respond by switching off and on again. The use of extension cables is prohibited due to the risk of damage and safety reasons.

Removing the horizontal beams
Removal of the horizontal pool beams is only possible after the water has been completely drained and the supports have been removed. Gently shaking the supports will release the pressure and facilitate the removal of the beams. It is recommended that the sleeve be gradually pulled away and the beams rotated during removal.