Search | Intex Support

33 results found for your search term: „Bimini Top Sun Shade (68600)“

Intex product user manual Bimini Top Sun Shade, 68600

User manual, in which you will find all important information on using your Intex product. Bimini Top Sun Shade, 68600

The following results contain only part of the search terms:

Can the hot tub be placed in the sun?

The hot tub can be temporarily exposed to direct sunlight, but should not be exposed to it for long periods of time. We recommend placing the hot tub under an umbrella, gazebo, awning, pergola or other shade to avoid deforming the inflatable part of the spa tub. The spa is equipped with a pressure release valve that automatically releases some air if necessary.

Why does the EASY SET inflatable pool top deflate one day after inflation?

If the top ring is inflated on a sunny hot day, the air inside will contract (less pressure) when the ambient temperature drops at night or at dawn. It may appear that the ring has lost air, but this is not the case. Do not inflate the ring and make sure the air valve is fully seated and closed.

Is it safe to lean, lie down or sit on the top inflatable ring?

Never allow any pool user (especially children) to lean, lie or sit on the top inflatable ring. This can cause instability in the pool, injuries and water leaking through the ring.

How do I inflate the top ring of an INTEX EASY SET pool?

Pay special attention to avoid overinflation. Use only a hand pump to inflate the ring. Never use a compressor. It is advisable that the inflatable ring is slightly firm to the touch. A ring that is too inflated may deform or burst in the sun. Pay special attention to temperature changes. In a cold environment, the ring will lose pressure and the air will contract. If this happens, DO NOT fill with more air, as the air will expand as the temperature rises. In a hot environment, the air expands. Some air must be let out so that the ring does not burst with too much internal pressure.

Water is coming out of the target on the top of the outside of the hot tub - is this okay?

Water should not be leaking from the target that aerates the massage jets. If it is, make sure there is not too much water in the hot tub. The water level in the tub must not exceed the max line including the people in the whirlpool. It may also be a product defect, in which case please file a claim with your dealer.

How to prevent damage to the lawn and fungus on the concrete?

This cannot be completely prevented, but you can minimise the risk by choosing the right location. We recommend keeping the area under the pool as dry as possible and regularly mopping up any spillages, especially in shaded areas where fungi are most likely to form.

The pool cover does not fit. Do I have the wrong size? What should I do?

The pool cover should be placed with the help of another person. While holding the cover by the end, the second person should walk around the pool and pull the cover over the top ring (for Easy Set pools) or over the wall (for Metal and Ultra frames). You can also place the cover in direct sunlight to help it stretch out.

Bleeding the cartridge filter pump

Too much air in the filtration system reduces water flow and can cause noisy operation or filtration malfunction. Venting is accomplished by turning the vent valve until water begins to escape. After proper venting, the filtration can be turned back on.

Checklist for using Intex PureSpa

Operation of the Intex PureSpa hot tub requires a grounded outlet, a separate circuit breaker and avoiding extension cords. Regular testing of the surge protector and placing the plug in a dry and protected environment also ensures safety.