Protection against spam bots. Please answer the following question: What year is it this year?
81 results found for your search term: „6-person Round Bubble Spa S2 (28428NP)“
The following results contain only part of the search terms:

High chlorine level in the spa
Too high a chlorine concentration can damage the hot tub - from staining the tub and warping the PVC to degrading the heater or filter pump. Always test the water before adding chlorine, and always blow out and store the hot tub if it is inactive for long periods of time.

Code E90
Code E90 indicates insufficient water flow, usually due to a clogged filter or poor water quality. Common causes include dirty water, old filter or low chlorine levels. Changing the cartridge regularly and adjusting the water chemistry helps prevent problems.

Where should whirlpool filter be screwed onto
The filter in the whirlpool must be screwed onto the bottom suction opening so that the water passes through the filter cartridge correctly. Incorrect positioning can cause blockage of the pump outlet and damage to the filter, which is not covered by the warranty.

Can a warped/bulging tub be repaired?
A deformed bathtub cannot be repaired. In such cases, the dividers, which are located in the tub's intermediate wall, will break and are therefore unrepairable. If the problem occurs within the warranty period (2 years), reclaim the product from the dealer. If the problem occurs after the warranty, a replacement tub can be purchased from us.

Control panel – general informa
The control panel for the hot tub is either attached to the hot tub or wireless. Operation is simple, however, with a wireless panel, conditions can occur that confuse the user. Make sure that the panel is unlocked and that you are not pressing the buttons too long or too quickly in succession.

How do I find the hole in the spa tub?
The best way to find out where air is leaking from your spa tub is to spray the tub with a soapy water solution and watch where bubbles form. That's where the leak is. Pay special attention to the inflation valve. If air is leaking from it, you can tighten the valve with the included wrench. In the event of a defect, the inner removable part of the inflation valve can be purchased from us as a spare part.

Where to find the spare part number
On this page, you will find a sample product diagram that is always included in the user manual. It is used to easily identify the required spare part number. The diagram helps users accurately determine the specific replacement part so they can order the correct one.

How do I seal a spa tub?
You can use the PVC patch included in the spa package to fix the hole on the spa tub. You can use any adhesive designed for PVC - e.g. Bison Vinyl, Ceys, Lear outdoor.