Search | Intex Support

82 results found for your search term: „4-person Glow Deluxe Round Bubble Spa S2 (28494NP)“

The following results contain only part of the search terms:

High chlorine level in the spa

Too high a chlorine concentration can damage the hot tub - from staining the tub and warping the PVC to degrading the heater or filter pump. Always test the water before adding chlorine, and always blow out and store the hot tub if it is inactive for long periods of time.

Code E90

Code E90 indicates insufficient water flow, usually due to a clogged filter or poor water quality. Common causes include dirty water, old filter or low chlorine levels. Changing the cartridge regularly and adjusting the water chemistry helps prevent problems.

Where should whirlpool filter be screwed onto

The filter in the whirlpool must be screwed onto the bottom suction opening so that the water passes through the filter cartridge correctly. Incorrect positioning can cause blockage of the pump outlet and damage to the filter, which is not covered by the warranty.

Why do small bubbles appear in the water when the INTEX saltwater system is in operation?

When a chemical process takes place in the electrode, small amounts of gases such as oxygen and hydrogen are produced. Small bubbles are therefore normal.

Control panel – general informa

The control panel for the hot tub is either attached to the hot tub or wireless. Operation is simple, however, with a wireless panel, conditions can occur that confuse the user. Make sure that the panel is unlocked and that you are not pressing the buttons too long or too quickly in succession.

Can a warped/bulging tub be repaired?

A deformed bathtub cannot be repaired. In such cases, the dividers, which are located in the tub's intermediate wall, will break and are therefore unrepairable. If the problem occurs within the warranty period (2 years), reclaim the product from the dealer. If the problem occurs after the warranty, a replacement tub can be purchased from us.

How do I find the hole in the spa tub?

The best way to find out where air is leaking from your spa tub is to spray the tub with a soapy water solution and watch where bubbles form. That's where the leak is. Pay special attention to the inflation valve. If air is leaking from it, you can tighten the valve with the included wrench. In the event of a defect, the inner removable part of the inflation valve can be purchased from us as a spare part.

Cleaning the electrolytic cell For PureSpa Jet&Bubble Deluxe

Proper electrode function depends on regular cleaning with vinegar and pressure rinsing. In case of heavy soiling, it is necessary to let the titanium plates soak longer. Cleaning prolongs the life of the component and ensures efficient chlorine production in the whirlpool.

Not producing chlorine – No error code For PureSpa Jet&Bubble Deluxe

Chlorine can be missing from the water even with a properly functioning salinator if it is immediately consumed for disinfection or degraded by the sun. It is important to reactivate the solinator, clean the electrodes regularly and cover the hot tub when not in use.

How to store a swimming pool over the winter?

You can leave your pool outside over the winter (year-round) by following the procedure outlined in the user manual. Or you can fold it up and store it. You will then need to clean it first with mild soap and water. Clean all parts thoroughly and make sure they are completely dry before storing. Drying may take several days. Then dust the pool with cosmetic powder or talcum powder to prevent the pool walls from sticking together during storage and to absorb any remaining moisture.