Protection against spam bots. Please answer the following question: What year is it this year?
74 results found for your search term: „4-person Calacatta Dual Zone Square Combo Spa S1 (28464)“
The following results contain only part of the search terms:

Code E90
Code E90 indicates insufficient water flow, usually due to a clogged filter or poor water quality. Common causes include dirty water, old filter or low chlorine levels. Changing the cartridge regularly and adjusting the water chemistry helps prevent problems.

Where should whirlpool filter be screwed onto
The filter in the whirlpool must be screwed onto the bottom suction opening so that the water passes through the filter cartridge correctly. Incorrect positioning can cause blockage of the pump outlet and damage to the filter, which is not covered by the warranty.

High chlorine level in the spa
Too high a chlorine concentration can damage the hot tub - from staining the tub and warping the PVC to degrading the heater or filter pump. Always test the water before adding chlorine, and always blow out and store the hot tub if it is inactive for long periods of time.

General information about Wi-Fi and the Intex App
Proper connection of the Intex PureSpa hot tub to the application requires a stable Wi-Fi signal in the 2.4 GHz band. Setting up the router, turning off the 5GHz band, sufficient signal and appropriate device positioning are key to avoid pairing issues.

General maintenance for the PureSpa
To keep your hot tub clean and functioning properly, it is important to change the filter regularly, monitor pH, alkalinity and chlorine levels, and maintain optimal water chemistry. Cloudy or green water indicates a lack of disinfection and requires thorough cleaning and treatment.

Test strips
Test strips measure chlorine levels, pH, alkalinity and water hardness. The pH should be between 6.8 and 7.6, alkalinity between 60 and 120 ppm, and free chlorine between 2 and 4 ppm. Submerge the entire strip in water, remove and allow to lie horizontally. After 15 seconds, read the water values.

Can a warped/bulging tub be repaired?
A deformed bathtub cannot be repaired. In such cases, the dividers, which are located in the tub's intermediate wall, will break and are therefore unrepairable. If the problem occurs within the warranty period (2 years), reclaim the product from the dealer. If the problem occurs after the warranty, a replacement tub can be purchased from us.

Where to find the spare part number
On this page, you will find a sample product diagram that is always included in the user manual. It is used to easily identify the required spare part number. The diagram helps users accurately determine the specific replacement part so they can order the correct one.

How do I seal a spa tub?
You can use the PVC patch included in the spa package to fix the hole on the spa tub. You can use any adhesive designed for PVC - e.g. Bison Vinyl, Ceys, Lear outdoor.