To keep the electrodes working optimally, it is necessary to clean them manually at regular intervals. You can clean the electrode according the step-by-step plan below:
| Step 1: | Switch off the saltwater system and remove the plug from the outlet. |
| Step 2: | Unscrew the inlet and outlet on the inside of the pool. Put the (black) plugs in the openings. |
| Step 3: | Disconnect the 2 hoses from the saltwater system. (see figure 1-3) |
| Step 4: | Loosen the swivel of the titanium electrode and disconnect the titanium electrode plug. (see figure 4) |
| Step 5: | Loosen the cell nut and remove the titanium electrode from the cell housing. (see figure 5) |
| Step 6: | Place the titanium electrode in a container and pour cleaning vinegar/kitchen vinegar into the container until the titanium electrode is fully submerged. Allow the plates to soak for at least 1 hour. For severe deposits, an overnight soak is recommended. Then rinse the electrode under the tap or with a garden hose. (see figure 6) |
| Step 7: | Put everything back together by going steps 3-6 in reverse order. |
 |
 |
 |
 |
 |
 |